Draytek Vigor2136 Series User Manual page 151

Connection Security
Authentication
Required
Sending Intervals
Send Test Email to
Cancel
Apply
After finishing this web page configuration, please click Apply to save the settings.
There are three methods to enhance the connection security of SMTP
server.
None - No SSL. Packets will be transferred without encryption.
SSL - Packets will be transferred with encrypted connection. Select to
use SMTPS (SMTP over SSL) to communicate with the SMTP server.
Note that the port number used for SMTPS server is 465.
StartTLS - It is a protocol used in communication to initiate a
transition from an insecure one to a secure channel.
Select to send username and password to SMTP server for
authentication.
Username – Username for authentication. Maximum length is 31
characters.
Password – Password for authentication. Maximum length is 31
characters.
Minimum amount of time, in seconds, to wait between sending e-mail
messages.
Specify an email address.
Send Test Message - Click it to send a test e-mail according to above
configuration.
Discard current settings and return to the previous page.
Save the current settings and exit the page.
141