Draytek Vigor2136 Series User Manual page 215

VPN Access Control
Mode
Enable
Maximum VPN Login
Failures
Penalty Period
Cancel
Apply
After finishing this web page configuration, please click Apply to save the settings.
II-4-1-2 WireGuard
WireGuard is a secure, fast, and modern open-source VPN Protocol. This VPN connection can build
a VPN by exchanging private and public keys between VPN servers (e.g., Vigor router) and VPN
clients (e.g., WireGuard VPN Client).
Specified Interface – Customize the WAN interface, IP address, and
VPN protocols which allow the VPN connections.
+Add – Click to have a new entry setting.

VPN Access List
It can filter trusted VPN connections by setting up IP object/group
allow lists or block lists.
Allow All Connections – Accept the VPN connections from all clients.
Allow List – Accept VPN connections from users within the IP
object/group settings selected below.
+Add - Click to have a new entry setting.

Block List – Deny VPN connections from users within the IP
object/group settings selected below.
+Add - Click to have a new entry setting.

Brute Force Protection
Switch the toggle to enable/disable the function.
Any client trying to access into Internet via Vigor router will be asked
for passing through user authentication. Such feature can prevent
Vigor router from attacks when a hacker tries every possible
combination of letters, numbers and symbols until find out the
correct combination of password.
Specify the maximum number of failed login attempts before further
login is blocked.
Set the lockout time after maximum number of login attempts has
been exceeded. The user will be unable to attempt to log in until the
specified time has passed.
Discard current settings and return to the previous page.
Save the current settings and exit the page.
205