Draytek Vigor2136 Series User Manual page 230

Item
Username
Usage
Password/
New Password/
Confirm New
Password
Status
Group Policy
Expiration Time
Role
Allow Login from WAN
User Information
Description
Enter the Login name (e.g., LAN_User_Group_1, WLAN_User_Group_A,
WLAN_User_Group_B, etc.) for this user profile.
Define the type of this user profile.
IAM User – This profile can be used for VPN, RADIUS, 802.1X, USB and
IAM (AWS Identity and Access Management) authentication.
Router Management – This profile is only for router management
access and cannot be used for VPN, RADIUS, 802.1X, USB, and IAM
authentication.
Password (e.g., lug123, wug123,wug456, etc.) for this user profile.
When a user tries to access the Internet, he or she must supply a valid
user name and password combination for authentication. The profile
with matching user name and password will be applied to the session.
General
Active – Enable the general settings in this page.
Inactive – Disable the general settings in this page.
It is available if "IAM User" is selected as the usage.
Select a group policy profile to be applied by this user profile.
It is available if "IAM User" is selected as the usage.
It means that the user account will be automatically disconnected
after the time is up.
Set the network connection to work at certain time interval only. All
user accounts will apply the time configuration automatically by
default.
Never – The network connection is always on.
Expire in – The network connection will expire and terminate the
connection after specified minutes, hours, days, or weeks once built.
Expire at – The network connection will expire and terminate the
connection on the date and time specified below once built.
Date

Time

Expiration Time

It is available if "Router Management" is selected as the usage.
Administrator

Guest

Users

It is available if "Router Management" is selected as the usage.
If enabled, the user can login from WAN by using this user account.
Enable Email – Switch the toggle to enable or disable the email
setting.
Email – Enter the email address for receiving the MFA PIN code.

Send Email Notification to the newly created User – Send a

notification email to this user account.
Enable SMS – Switch the toggle to enable or disable the SMS setting.
SMS - Enter the destination SMS number for receiving the MFA

PIN code.
220