Auto Start On Ac Loss; Power-On Com1 Ring; Plug And Play Configuration; Plug And Play Submenu - NEC POWERMATE PRO2180 Manual

Auto Start on AC Loss

This field allows you to return to the last known state of
the computer in the event of a power loss. This field can
be either "Enabled" or "Disabled." The default is
"Enabled."

Power-On COM1 Ring

If a telephony device is installed, this field enables the
system to power on upon an incoming call. This field
can be either "Enabled" or "Disabled." The default is
"Disabled."

Plug and Play Configuration

When the cursor is placed in the Peripheral Configuration
field, you can select it by pressing
Play Submenu appears for setting PCI/ISA Plug and Play
expansion board parameters.

Plug and Play Submenu

The Plug and Play Submenu lets you check or change the
Configuration Mode parameters.
Use the Configuration Mode field to choose the method on
how information about the legacy ISA expansion boards
(ISA boards which do not have Plug and Play capabilities)
is conveyed to the BIOS. The information allows the BIOS
to set up PCI and ISA Plug and Play expansion boards
without conflicting with the legacy ISA cards. The choices
are as follows.
T
Use ICU
provided by run-time Plug and Play software
(Configuration Managers and ICU). When "Use ICU" is
chosen, the BIOS depends on run-time software to
ensure that there are no conflicts between ISA boards
with plug and play capabilities and those without.
4-24 NEC Drivers and Utilities
Enter
The BIOS depends upon the information
. The Plug and