Show System; Show Users - SMC Networks 6128PL2 - annexe 2 Management Manual

show system

This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to "Displaying
System Information" on page 3-12.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System Description: 24 10/100 ports and 4 gigabit ports with PoE switch
System OID String: 1.3.6.1.4.1.202.20.65
System Information
System Up Time:
System Name:
System Location:
System Contact:
MAC Address (Unit1):
Web Server:
Web Server Port:
Web Secure Server:
Web Secure Server Port:
Telnet Server:
Telnet Server Port:
Jumbo Frame:
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
0 days, 0 hours, 1 minutes, and 32.18 seconds
[NONE]
[NONE]
[NONE]
00-00-35-28-10-03
Enabled
80
Enabled
443
Enable
23
Disabled
System Management Commands
4
4-81