Show System; Show Users - SMC Networks 8126PL2-F - annexe 1 Management Manual

show system

This command displays system information.
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to "Displaying
System Information" on page 3-11.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System Description: SMC TigerSwitch 10/100/1000 PoE SMC8126PL2-F
System OID String: 1.3.6.1.4.1.202.20.74
System Information
System Up Time:
System Name:
System Location:
System Contact:
MAC Address (Unit1):
Web Server:
Web Server Port:
Web Secure Server:
Web Secure Server Port:
Telnet Server:
Telnet Server Port:
Jumbo Frame:
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a "*" symbol next to
the Line (i.e., session) index number.
0 days, 0 hours, 1 minutes, and 32.18 seconds
[NONE]
[NONE]
[NONE]
00-D0-CB-6A-23-F3
Enabled
80
Enabled
443
Enable
23
Disabled
System Management Commands
4
4-21