Introduction; The Sl4M™/T4M™ Thermal Printer; Standard Features - Printronix SL4M User Manual

1
The SL4M™/T4M™ Thermal Printer
NOTE: As used in this manual, the terms "SL4M/T4M" and "printer" refer to
The SL4M/T4M series consists of a family of high quality, direct thermal and
thermal transfer printers specifically designed for printing labels and tags from
any MS-DOS
The SL4M/T4M, Smart Ready, and SmartLine series are comprised of the
products detailed in Table 1.
NOTE: All models are RFID Ready.
SL4M/T4M
SL4M/T4M

Standard Features

•
Thermal Transfer and Direct Thermal Printing
•
Printheads: Snap-in, interchangeable 203 dpi and 305 dpi
•
Print speeds: Up to 10 ips (both 203 and 305 dpi)
•
Printing: On demand single label and batch label
•
Media sensing: Horizontal positioning for gap, notch, hole, or black mark
sensing.
•
Media capacity: Eight inch diameter roll media on three inch core
(203mm diameter on 76.2mm diameter core)
•
Fanfold media handling
•
Ribbon capacity: 450m on one inch core (4.5 µm ribbon thickness)

Introduction

all models within the series. "SL" refers to all SmartLine RFID models.
® ®
, Windows , or ASCII based compatible computer.
Table 1. The SL4M/T4M Thermal Printer
Max Print
Model
Speed (ips)
10
10
Printing Max Print
Density (dpi) Width (inches)
203 4.1
305 4.1
11