Nest Serv Type
You can change the Nest Server using this option, but consult your
administrator for the appropriate setting.
The options are Bindery (the factory default), NDS, and Auto.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be
available. The selections are as indicated below:
•
Enable. (the default) makes the NetBIOS protocol available
with the ethernet installed.
•
Disable. Makes the NetBIOS protocol unavailable during
printer operation.
Novell Frame
This selection determines which framing scheme will be used in
processing Novell signals.
•
Auto Sensing (the default)
•
Ethernet II
•
Ethernet 802.3
•
Ethernet 802.2
•
802.2 Snap
ASCII Data Port
This option sets the port number for ASCII print jobs. The data port
number needs to match your host system setting.
The range is 0 - 65535, and the factory default is 9100.
Keep Alive Timer
This is the time that the Keep Alive Timer will run. With the Keep
Alive Timer on, the tcp connection will stay connected even after
the print job has terminated.
The range is 2-10 minutes, and the factory default is 3 minutes.
Ethernet Submenu
239