ROBOTIQ Hand-E C10 Instruction Manual page 11

2. Safety
WARNING
The operator must have read and understood all of the instructions in the following manual before handling
the RobotiqHand-E C10 Gripper.
INFO
The term "operator" refers to anyone responsible for any of the following operations on the Robotiq Hand-E
C10 Gripper:
Installation
l
Control
l
Maintenance
l
Inspection
l
Calibration
l
Programming
l
Decommissioning
l
This documentation explains the various Robotiq Hand-E C10 Gripper components. It includes all general operations regarding
the whole life-cycle of the product.
The drawings and photos in this documentation are representative examples. Discrepancies may be observed between those and
the delivered product.
2.1. Warning
CAUTION
Using the gripper in noncompliance of any warning is inappropriate and may cause injury or damage.
WARNING
Properly secure the gripper before operating the robot.
l
Do not install or operate a gripper that is damaged or lacking parts.
l
Never supply the gripper with an alternative current source.
l
Make sure all cord sets are always secured at both ends: the gripper and the robot.
l
Always meet the recommended keying for electrical connections.
l
Make sure no one is in the robot and/or gripper path before initializing the robot's routine.
l
Robotiq Hand-E C10 Gripper Instruction Manual
11