Intended Use - ROBOTIQ Hand-E C10 Instruction Manual

12
Always meet the gripper's payload specifications.
l
Set the gripper's pinch force and speed based on your application.
l
Keep fingers and clothes away from the gripper while the power is on.
l
Do not use the gripper on people or animals.
l
Make sure there are no gripper parts on the ground path of the welding power source.
l
Make sure to wear safety glass when working next to the robot and/or gripper.
l
Reduce the maximum robot acceleration and speed when manipulating heavy workpiece.
l
Risk assessment and final application
The Robotiq Hand-E C10 Gripper is meant to be used on an industrial robot. The robot, gripper, and any other equipment used in
the final application must be evaluated with a risk assessment.
It is the robot integrator's duty to ensure that all local safety measures and regulations are met. There may be risks that require
additional protection or safety measures. For example, the work-piece the gripper is manipulating might be inherently dangerous
to the operator).

2.2. Intended Use

CAUTION
Always comply with local and/or national laws, regulations, and directives on automation safety and general
machine safety.
The gripper unit is designed for gripping and temporarily securing or holding objects. It is intended for installation on a robot or
other automated machinery and equipment. The unit should be used exclusively within the range of its technical data.
Any other use is deemed improper and unintended use. Robotiq is not liable for any damages resulting from any improper or
unintended use.
Robotiq Hand-E C10 Gripper Instruction Manual