Table of Contents
Advertisement
TRENDnet User's Guide
ARP Inspection VLAN
Security > Dynamic ARP Inspection > Log
1. Log into your switch management page (see "Access your switch management page"
on page 5).
2. Click on Security, click on Dynamic ARP Inspection, and click on ARP Inspection VLAN
3. Select the Log Buffer then Apply to view.
© Copyright 2023 TRENDnet. All Rights Reserved.
ACL
Access Control configuration allows you to control different aspects of the Ethernet
traffic as it enters the switch ports and is process through the Switch. You can specify
what traffic is permitted or denied to flow through the switch by setting up specific filter
criteria at an ingress port. You can also manage the switching priority of Ethernet
packets. All of this is done by specifying policies that define the filtering and priority
behavior.
ACL Configuration Wizard
Security > ACL > ACL Configuration Wizard
The ACL Configuration Wizard page allows for simple configuration of ACL profiles and
rules.
1. Log into your switch management page (see "Access your switch management page"
on page 5).
2. Click on Security, click on ACL, and click on ACL Configuration Wizard.
3. Review the settings. Click Apply to save the settings.
ACL Configuration Wizard
Create an ACL rule by selecting the appropriate fields.
•
Source- Defines the access packet origin.
o
Any- Indicates ACL action will be taken on packets from any source.
o
MAC Address – Indicates ACL action will be taken on packets from the
specified MAC address.
o
IPv4 Address- Indicates ACL action will be taken on packets from the
specified IPv4 source address.
o
IPv6 Address- Indicates ACL action will be taken on packets from the
specified IPv6 address.
•
Destination- Defines the access packet destination.
o
Any- Indicates ACL action will be taken on packets to any destination.
o
MAC Address – Indicates ACL action will be taken on packets to the
specified MAC address.
PoE Web Smart Switch Series
110
Advertisement
Table of Contents
