Igmp Snooping; Configure Igmp Snooping Settings - TRENDnet TEG-30102WS User Manual

TRENDnet User's Guide
In the list, you can click Modify to modify an entry or click Delete or delete the entry. If
the entries span multiple pages, you can navigate page number in the Page field and
click Go or you can click First, Previous, Next, and Last Page to navigate the pages.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2018 TRENDnet. All Rights Reserved.

IGMP Snooping

Configure IGMP Snooping Settings

Bridge > IGMP Snooping > Basic Settings
1. Log into your switch management page (see
on page 11).
2. Click on Bridge, click on IGMP Snooping, and click on Basic Settings.
3. To enable IGMP Snooping, select Enabled from the drop down menu under IGMP
Snooping Global State.
4. Click Apply.
5. Click Save Settings to Flash (menu).
6. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TEG-30102WS
"Access your switch management page"
37