Table of Contents
Advertisement
port of the Switch (Switch A) to any of the 10Mbps, 100Mbps
(MDI-X) port of the other switch (switch B) or other devices.
1.
The
"100M
indicator light green for hookup to 100Mbps speed or
light amber for hookup to 10Mbps speed.
2.
The "10/100M FDX, 10/100M COL" LED indicator
depends upon switch's capabilities for full-duplex or
half-duplex
Port Speed & Duplex Mode
After plugging the selected cable to a specific port, the
system uses auto-negotiation to determine the transmission
mode for any new twisted-pair connection:
If
the
attached
negotiation or has auto-negotiation disabled, an auto-
sensing process is initiated to select the speed and set the
duplex mode to half-duplex.
LINK/ACT,
device
18
10M
LINK/ACT"
does
not
LED
support
auto-
Advertisement
Table of Contents
