Configure The Snmp Group Table - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Configure the SNMP Group Table

Management > SNMP > Group Access Table
The SNMP View Names are defined in the SNMP Group Access table and are based on
the User and Group Names
1. Log into your switch management page (see
on page 11).
2. Click on Management, click on SNMP, and click on Group.
3. Click Add to a new SNMP group table. Review the settings.
Item Description
Specify SNMP group name, and the maximum length is 30
Group
characters.
Version Spedify SNMP version
•
SNMPv1: SNMP Version 1.
•
SNMPv2: Community-based SNMP Version 2.
•
SNMPv3: User security model SNMP version 3.
Specify SNMP security level
•
No Security : Specify that no packet authentication is
performed.
Security
•
Authentication: Specify that no packet authentication without
Level
entryption is performed.
•
Authentication and Privacy: Specify that no packet
authentication with entryption is performed.
View
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
Read Select read view name if Read is checked.
Write Select write view name, if Write is checked.
Notify Select notify view name, if Notify is checked.
TPE-3012LS / TPE-3018LS
158