Switch Installation; Desktop Hardware Installation; Basic Ip Configuration - TRENDnet TEG-S50ES User Manual

5-port gigabit edgesmart switch

Table of Contents

TRENDnet User's Guide

Switch Installation

The site where you install the switch may greatly affect its performance. When

installing, consider the following pointers:

Note: Your switch model may be different than the one shown in the example

illustrations.

 Install the Switch in a fairly cool and dry place.

 Install the Switch in a site free from strong electromagnetic field generators (such

as motors), vibration, dust, and direct exposure to sunlight.

 Leave some space on the sides of the switch for ventilation.

 Install the Switch on a sturdy, level surface that can support its weight, or in an

EIA standard-size equipment rack. For information on rack installation, see the

next section, Rack Mounting.

 When installing the Switch on a level surface, attach the rubber feet to the

bottom of each device. The rubber feet cushion the hub and protect the hub

case from scratching.

Note: Your switch model may be different than the one shown in the example

illustrations.

3. Assign a static IP address to your computer's network adapter in the subnet of

192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.

4. Open your web browser, and type the IP address of the switch in the address bar, and

then press Enter. The default IP address is 192.168.10.200.

5. Enter the User Name and Password, and then click Login. By default:

TEG-S50ES

Table of Contents