Ip Address; Ip Address Dhcp; Debug Ip Dhcp Client - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

ip address

Command
Syntax
Description
Command Modes
User Guidelines
Example
Command History

ip address dhcp

Command
Command Modes
Example
Command History

debug ip dhcp client

Command
15-4
To configure the IP address of interface.
ip address <ip-address> <subnet-mask> <gw-address>
no ip address <ip-address>
IP address of the interface
ip-address
Subnet mask of the interface
subnet-mask
IP address of the gateway
gw-address
Interface Configuration Mode
The no form will delete the configured IP address.
switch(config-if)# ip address 20.0.0.1 255.0.0.0 20.0.0.254
Version History
1.00.001 This command was introduced.
To set the IP address of interface to be assigned by DHCP server.
ip address dhcp
Interface Configuration Mode
switch(config-if)#ip address dhcp
Version History
1.00.001 This command was introduced.
To enable the debug mode of DHCP client.
debug ip dhcp client { all | event | packets | errors | bind }
no debug ip dhcp client { all | event | packets | errors | bind }