Understanding Safety Signs - MacDon R1 Series Operator's Manual

1.12 Understanding Safety Signs

Safety sign decals use illustrations to convey important safety or equipment maintenance information.
113482
General hazard pertaining to machine operation and servicing
DANGER
To prevent injury or death from improper or unsafe machine
operation:
Read the operator s manual and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
Do NOT allow untrained persons to operate the machine.
Review the safety instructions with all Operators every year.
Ensure that all the safety signs are installed and legible.
Make certain everyone is clear of the machine before
starting the engine and during operation.
Keep riders off of the machine.
Keep all the shields in place and stay clear of moving parts.
Disengage the header drive, put the transmission in Neutral,
and wait for all movement to stop before leaving the
operator s position.
Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging the machine.
Engage the safety props to prevent a raised unit from falling
before servicing it in the raised position.
Use the slow moving vehicle emblem and flashing warning
lights when operating on roadways unless prohibited by law.
166466
High-pressure oil hazard
WARNING
High-pressure hydraulic fluid can penetrate human skin, which
can cause serious injury such as gangrene, which can be fatal.
To prevent this:
Do NOT go near hydraulic fluid leaks.
Do NOT use a finger or skin to check for hydraulic
fluid leaks.
Lower the load or relieve the pressure in the hydraulic
system before loosening any hydraulic fittings.
If you are injured, seek emergency medical help.
IMMEDIATE surgery is required to remove hydraulic fluid
which has penetrated the skin.
262634
SAFETY
Figure 1.30: 113482
Figure 1.31: 166466
20
Revision A