MacDon R1 Series Operator's Manual page 160

NOTE:
It may be necessary to remove and replace the driveline shield cones during the greasing procedure. Refer to
Driveline Shield Cone, page 241
NOTE:
Use high-temperature extreme-pressure (EP2) performance with 10% max molybdenum disulphide (NLGI Grade 2) lithium
base unless otherwise specified.
IMPORTANT:
Apply grease to driveline slip-joint grease fittings.
262634
MAINTENANCE AND SERVICING
for more information.
Figure 4.10: Driveline Grease Locations
(Every 25 Hours)
A - Primary Driveline Slip-Joint
142
4.5.2
A
B
B - Driveline Slip-Joint
Revision A