Daily Start-Up Check - MacDon R1 Series Operator's Manual

3.4 Daily Start-Up Check

Perform this procedure before operating the machine.
CAUTION
• Ensure that the tractor and the rotary disc pull-type are properly attached, that all controls are in neutral, and that
the tractor brakes are engaged.
• Clear the area of bystanders. Walk around the rotary disc pull-type to confirm that no one is nearby.
• Wear close-fitting clothing and protective shoes with slip-resistant soles. Have at hand any protective clothing and
personal safety devices that MIGHT be necessary throughout the day. Don't take chances when it comes to safety.
• Clear any obstacles that might interfere with the operation of the machine.
1. Check the machine for leaks or any parts that are missing, broken, or not working correctly.
NOTE:
Use the proper procedure when searching for pressurized fluid leaks. For instructions, refer to
Hoses and Lines, page
2. Clean all lights and reflective surfaces on the machine, and check the lights to ensure that they are operating correctly.
3. Perform all daily maintenance procedures. For instructions, refer to
262634
291.
OPERATION
4.3.1 Maintenance Schedule/Record, page
45
4.6.1 Checking Hydraulic
132.
Revision A