11. Remove two M10 bolts and washers (A).
12. Use the Safecut spindle-nut wrench to remove nut (A).
13. Remove shear pins (B).
IMPORTANT:
Do NOT damage the pin bore on the pinion.
14. Remove hub (A).
15. Check the nut and the hub for damage. Replace them if
necessary.
262634
MAINTENANCE AND SERVICING
Figure 4.161: Cutterbar Spindle
Figure 4.162: Cutterbar Spindle
Figure 4.163: Cutterbar Spindle
233
A
B
A
A
Revision A
Need help?
Do you have a question about the R1 Series and is the answer not in the manual?