Start-Up Wait Time - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

PT Settings
PT Settings Tab
Pages for NSJ5
Page 1
Page 3
8-3-1

Start-up Wait Time

1,2,3...
The start-up wait time refers to the waiting time before the Display Section of
the NSJ Controller starts communicating with the host after the Display Sec-
tion's power is turned ON or the Display Section is reset. Set the system star-
tup waiting time when the host requires time before it starts running.
The setting range is between 0 and 10 s and the default is 0 s.
Set the system start-up waiting time by using operations from the PT Tab
Page in the System Menu, as follows:
1. Set the waiting time in the Start-up Wait Time field in seconds. Input the
value in the dialog box that is displayed when the setting input field is
pressed.
2. After setting, press the Write Button to save the setting.
Page 2
Page 2
Section 8-3
141