System Memory List - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

System memory is used for exchanging information between the Controller Section and the Display Section,
such as controlling the Display Section and notifying the Controller Section of Display Section status.
The system memory is divided into bit and word sections.
System Bit Memory ($SB)
System bit memory ($SB) is used for exchanging information between the Controller Section and the Display
Section in bit units, such as controlling the Display Section and notifying the Controller Section of Display Sec-
tion status.
The system bit memory contains 53 bits with predefined functions. The system bit memory is listed in the fol-
lowing table.
Address
$SB0 Notification
$SB1 Notification
$SB2 Notification
$SB3 Control
$SB4 Notification
$SB5 Notification
$SB6 Control
$SB7 Control
$SB8 Control
$SB9 Control
$SB10 Control
$SB11 Notification
$SB12 Control
$SB13 Control
$SB14 Control
$SB15 Notification/control
$SB16 Control
$SB17 Control
$SB18 Control
$SB19 Control
$SB20 Control
$SB21 Control
$SB22 Control
$SB23 Control
$SB24 Notification/control
$SB25 Control
$SB26 Control
$SB27 Control
$SB28 Control
$SB29 Control
$SB30 Notification
$SB31 Notification
$SB32 Notification/control
$SB33 Notification/control
Appendix B

System Memory List

Classification
RUN Signal (Pulse)
RUN Signal (Always ON)
ScreeN Switch Strobe
Prohibit Shifting to System Menu
Battery Low
Data Input Detector
Brightness Adjust, High
Brightness Adjust, Medium
Brightness Adjust, Low
Backlight Control (screen saver control)
Control Backlight Flashing
Backlight Status
Continuous Buzzer
Short Intermittent Buzzer
Long Intermittent Buzzer
Notification/Control of Video Input
Processing Priority Registration for Port A (NT Link 1:N)
Processing Priority Registration for Port B (NT Link 1:N)
Display Keypad with Temporary Input
Prohibit input
Contrast Adjustment (+10 levels) (NSJ5-SQ/MQ@@-G5D only)
Contrast Adjustment (+1 level) (NSJ5-SQ/MQ@@-G5D only)
Contrast Adjustment (−1 level) (NSJ5-SQ/MQ@@-G5D only)
Contrast Adjustment (−10 levels) (NSJ5-SQ/MQ@@-G5D only)
Video Capture
Starts Printing/Capture Screen (NSJ12/NSJ10/NSJ8 only)
Stops Printing
Test Pattern Printing
Printer Head Cleaning
Update Printer Status
Printer Busy Status
Notification of Printer Error
Initialize Alarm/Event History
Save Alarm/Event History
Function
213