Screen Data Check - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

Screen Data Check

8-7

Screen Data Check

Note
1,2,3...
Note
Registered screens (numbers 0 to 3,999) can be displayed and checked using
operations from the System Menu.
(1) The screen displayed when checking screen data is a sample and cannot
be used to communicate with the host. The flicker function is also dis-
abled.
(2) Only the user screens (0 to 3,999) can be displayed. System screens
cannot be displayed.
Display check screens by using the following procedure from the System
Menu.
1. Select the Data Check Tab.
2. Set the screen number and press the Display Button to display the screen
as a sample.
3. Press the ON Button next to the Show Address heading before displaying
the sample screen to display the set addresses instead of labels for func-
tional objects.
4. Press any part of the sample screen that is displayed to return to the
Screen Data Check Screen.
Addresses are not displayed for data block tables.
Section 8-7
159