Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 13

This manual contains the following sections.
Section 1 introduces the NSJ-series NSJ Controllers and describes differences between the NSJ
Controllers and previous OMRON product. Application precautions are also provided.
Section 2 provides the basic operating procedures required to use the NSJ-series NSJ Controller.
Section 3 provides the specifications of the NSJ-series NSJ Controller and describes the system con-
figurations in which it is used.
Section 4 gives the names of the parts of the NSJ Controller, describes the function of each part, and
provides NSJ Controller Dimensions.
Section 5 describes how to install and wire the NSJ-series NSJ Controller.
Section 6 section provides information on functionality added to the PLC Setup, I/O Allocations, and
I/O Memory of the NSJ Controllers in comparison to the functionality of CJ-series PLCs. Refer to the
CJ Series PLC Operation Manual (W393) for all information not given here.
Section 7 describes the operation of the Controller Section.
Section 8 describes the methods for operating the System Menu.
Section 9 describes error processing and troubleshooting procedures needed to keep the NSJ Con-
troller operating properly.
Section 10 provides inspection and maintenance information.
The Appendices provide list of system memory in the Display Section and system program replace-
ment procedures for the Display Section.
xiv