Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 167

Initializing and Saving Data and Removing the Memory Card
1,2,3...
1,2,3...
136
Initializing the Error Log
1. Press the Initialize Button. A confirmation message will be displayed.
Press the Yes Button to initialize the data. Press the No Button to cancel
the initialize function.
2. When the Display Section has completed initializing the error log, a dialog
box will be displayed indicating that the error log has finished being initial-
ized.
Saving the Error Log
1. Press the Save Button. The Save Button will be lit yellow while data is be-
ing saved.
2. When the NSJ Controller has completed saving the error log, the Save But-
ton will return to its normal color and a dialog box will be displayed indicat-
ing that the save has been finished.
(1) The error log is deleted when project data or system programs are down-
loaded.
(2) The error log can also be initialized by turning ON $SB42 in system mem-
ory from the host, and can be saved by turning ON $SB43 in system
memory from the host. Refer to 2-4 System Memory in the NS-Series PT
Programming Manual (V073) for details.
Section 8-2