Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 160

Operating Modes and System Menu
Selecting Menu Items
Switching to RUN Status
from the System Menu
2. Pressing a Command Button Set to Display the System Menu
While creating screens, if a command button for displaying the System Menu
can be created on the screen. The System Menu can be displayed by press-
ing this type of command button.
3. Pressing a Command Button to Switch the Screen
The Screen Switch command button functions include a Indirect Specification
of Screen No. function. Store the BCD value 4002 (FA2 hex) at the communi-
cations address for indirect specification and press the command button.
Refer to 2-9 Buttons in the NS-Series PT Programming Manual (V073) for
information on command buttons.
4. Storing 4002 in $SW0 in System Memory
A BCD value of 4002 (FA2 hex) can be stored in $SW0 in System Memory to
display the System Menu. Refer to 2-4 System Memory in the NS-Series PT
Programming Manual (V073) for information on the system memory.
Items in the System Menu of the NSJ Controller can be displayed by simply
pressing the tab of the menu item to be displayed.
Example: Press the Hardware Check Tab in the System Menu to display the
Hardware Check Screen.
Press the Exit Button to return to RUN mode.
Section 8-1
Select the tab.
129