Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 195

Special Screens
Note
1,2,3...
164
(1) Always check carefully that the system is safe before performing the fol-
lowing operations using the device monitor.
• Changing the monitor data and timer/counter current values.
• Switching operating modes.
• Performing force-sets/resets.
• Changing timer/counter set values.
(2) The switchbox function is not supported by C-series and CV-series PLCs.
The Device Monitor Screen is displayed by using operations from the Special
Screen Tab Page from the System Menu, as follows:
1. Select Device Monitor from the Special Functions List Box, and press the
START Button.
2. The Device Monitor Screen will be displayed.
3. Press the Quit Button to return to the Special Screen.
Section 8-8