Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 138

Mounting and Wiring Expansion Units
Ethernet Connectors
Connecting
Connectors
1,2,3...
The following standards and specifications apply to the connectors for the
Ethernet twisted-pair cable.
• Electrical specifications: Conforming to IEEE802.3 standards.
• Connector structure:
1. Lay the twisted-pair cable.
2. Connect the cable to the hub. Be sure to press in the cable until it locks into
place. Request cable installation from a qualified professional.
3. Connect the cable to the connector on the Ethernet Unit. When connecting
to a hub or Ethernet connector, be sure to press in the cable until it locks
into place.
RJ45 8-pin Modular Connector
(conforming to ISO 8877)
RJ45 Modular Connector
Section 5-3
107