Functions Of Parts - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

Nomenclature and Functions
NSJ5-TQ0@(B)-@@@ and NSJ5-SQ0@(B)-@@@
Controller Section DIP switch
Expansion Unit connector
24 V DC power supply terminals
Display Section DIP switch
Display Section reset switch
Note
4-1-2

Functions of Parts

RUN Indicator
DeviceNet indicators
DeviceNet 7-segment display
Controller Section indicators
FG terminal
Battery compartment
Memory Card power supply switch
DeviceNet connectors
Serial port B (Display Section)
The following NSJ Controllers do not have an Ethernet connector: NSJ5-
TQ00(B)-@@@ and NSJ5-SQ00(B)-@@@.
The RUN indicator shows the operating status of the NSJ Controller (including
the Controller Section and Expansion Unit).
Indicator
Lit NSJ Controller is oper-
ating normally.
Flashing Memory Card transfer
ended normally, but a
backlight error
occurred immediately
after the power supply
was turned ON.
Not lit • Power is not being supplied to the NSJ Controller.
• The fuse is broken.
• The system program is corrupted and the system cannot be booted.
DeviceNet unit number switch
DeviceNet node number switches
Ethernet connector
Serial port A (Display Section)
DeviceNet terminating
resistance switch
Green Orange
The file system check
that is performed
immediately after the
power is turned ON is
in progress.
Memory Card transfer
in progress.
Section 4-1
DeviceNet DIP switch
Memory Card
(Controller
Memory Card
Section)
(Display Section)
Serial port C (Controller Section)
USB slave port
Red
A fatal error has
occurred in the Con-
troller Section.
A WDT error has
occurred in the Con-
troller Section.
Memory Card transfer
ended in an error.
A non-fatal error has
occurred in the Con-
troller Section.
An initialization error
has occurred in the
Controller Section.
73