Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 175

PT Settings
1,2,3...
144
Set and display the date and time by using operations from the PT Tab Page
in the System Menu, as follows:
1. Press any two of the four corners of the touch panel. The System Menu will
be displayed.
2. Press the PT Tab to display the PT Tab Page. For the NSJ5, press the Left
or Right Arrow Key to switch to page 3/4 to display the time and date set-
tings.
3. To change the date, set the date using the tenkey that is displayed when
the date field is pressed. Use the following input format to set the date:
yyyy.mm.dd (yyyy: year, mm: month, dd: day), and then press the Enter
Button to enable the settings.
4. A confirmation message will be display for changing the date. Press the
OK Button. The dates in the Controller Section and Display section will be
changed.
Section 8-3