Overall Operating Procedure; Installing The Usb Driver - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

Overall Operating Procedure

2-1

Overall Operating Procedure

Note
2-2

Installing the USB Driver

Applicable Operating
Systems
Operation Procedure
1,2,3...
28
The overall procedure required setup an NSJ Controller is given below.
1. Install and Wire the NSJ Controller
(including connecting a computer, see note).
2. Set the Switches.
· Set the DIP switches on the Controller Section and Display Section
· Set the rotary switch on the DeviceNet Section (i.e., the unit
number as a CPU Bus Unit and the DeviceNet node address).
Set the following if an NSJ Controller Link Unit or NSJ Ethernet
Unit is mounted: Unit number as a CPU Bus Unit and the
Controller Link or Ethernet node address.
3. Turn ON the Power Supply.
• Turn ON the NSJ Controller for the first time, select the language,
and set the time.
• If the DeviceNet Section is being used, turn ON the
communications power supply and the slave power supplies before
turning On power to the NSJ Controller.

2-2 Installing the USB Driver

2-3 Operating Procedure for Controller Section
5. Start Operation.
(If the System Menu is displayed on the NSJ Controller, press
the Exit Button.)
6. Register and Start the NSJ Troubleshooter.
• Register the alarm function on the Display Section to
display the Troubleshooter Screen when an alarm occurs.
• Start the Troubleshooter from the System Menu.
Here, the procedure is shown for connecting the computer and NSJ Controller
with a USB cable.
Install the USB driver in the personal computer. After installation, data can be
transferred between the personal computer and NSJ Controller via USB.
Windows 98SE, Windows Me, Windows 2000, and Windows XP
Windows 2000 and Windows XP
1. Start Windows 2000 or Windows XP.
2. Connect the personal computer to the USB slave connector using the USB
cable. The following Found New Hardware Wizard will be displayed.
SECTION 5 Installation
and Wiring and
Connecting Programming
Devices in 3-2 System
Configuration
4-1-2 Functions of Parts
3-2 Starting the PT in
Cat. No. V083
2-4 Operating Procedure for Display Section
6-10 Starting Operations in
Cat. No. V083
10-2 NSJ Troubleshooter
Function
Section 2-1