Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 68

Operating Procedure for the Display Section
Note The settings made in the System Setting Dialog Box will overwrite the settings
made from the System Menu of the Display Section when screens are trans-
ferred.
Set the screen properties as required. Set the screen title, size,
pop-up screen setting, background and other settings.
Select PT - Screen/sheet properties.
Create a New Screen.
7.
Select File - New Screen.
Create Functional Objects.
8.
Select the functional object from the toolbar. Move the cursor to the screen
and drag the cursor from the start point to the end point of the functional object.
Select the functional object just placed on the screen and make address and
other settings from the property list. (Select the host name and set the address.
The address can also be set by selecting a symbol from the symbol table.)
Also set the properties for that functional object.
Save the Screen. Select File - Save Screen/Sheet.
9.
Save the Project. Select File - Save All.
10.
Print data as required. Select File - Print.
11.
Check operation using the screen data on the CX-Designer if required.
12.
Select Tools - Test.
Transfer the screen data to the NSJ Controller.
13.
Select the communications method.
Select PT - Transfer - Transfer Setting.
Transfer the screen data.
Select PT - Transfer - Transfer [Computer → PT].
14. Restart the Display Section Automatically.
(Automatically restarting the Display Section can be set when transferring
screen data.)
Section 2-4
4-13 Integrated
Simulation for the
Entire System in
Cat. No. V088
37