Communications Settings; Communications Conditions - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

Communications Settings

Note
8-6

Communications Settings

8-6-1

Communications Conditions

Communications
Conditions Setting Items
152
Setting item
Timeout (min) When the Time Out Option is set to ON, this setting specifies
the timeout time in minutes (1 to 60 minutes).
Switch Screen Click the ON or OFF Button to specify whether the screen is
when canceling the automatically switched to a specified screen when a user logs
authentication out. This option can be set when the password with levels func-
tion has been turned ON.
ON The screen is switched to the specified Switch Screen No.
when authentication is canceled.
OFF The screen is not switched when authentication is canceled.
Switch Screen No. If switching the screen when authentication is canceled has
been turned ON, the screen is changed to the screen number
set here when authentication is canceled.
(1) The password settings can also be made from the CX-Designer.
(2) When changing passwords, do not reset the PT or turn OFF the power
until the write operation has been completed (i.e., the Write Button has
returned to the status before being pressed). If the pass-word is not
saved properly, the screen may malfunction.
(3) If the password is forgotten, it cannot be checked from the PT. Check the
password using the CX-Designer.
The methods for setting the communications conditions with the host are
described here.
Set the communications conditions by using operations from the Comm Tab
Page in the System Menu, as follows: Input the communications conditions,
and then press the Write Button to save the settings.
Changed settings are enabled after the Display Section is restarted.
The setting items for the communications conditions between the Display
Section and host are as follows:
Communications Auto-return
Select whether or not to use communications auto-return using the ON and
OFF Buttons.
Section 8-6
Function