Language Selection; Removing The Memory Card - Omron NSJ CONTROLLERS - 03-2008 Operation Manual

Initializing and Saving Data and Removing the Memory Card
8-2-6

Language Selection

1,2,3...
Note
8-2-7

Removing the Memory Card

1,2,3...
The system language can be set to either Japanese or English. The system
language will be used on the system menu, input keypads, message dialog
boxes, etc., on the NSJ Controller.
The system language is set from the Initialize Tab Page in the System Menu
Window using the following procedure.
1. Select either Japanese or English in the Select Language Area.
2. After specifying the language, press the Write Button. The system lan-
guage will be switched after the new setting has been saved.
If ASCII is set as the character display format for String Display & Input, list
displays, or data block tables (character fields), the following character codes
will be used depending on the system language that is set.
System language
Japanese
English
The above codes will also be used when indirect specifications are made for
label strings for label objects.
The Memory Card can be removed from the Display Section while the Display
Section is ON. Use the following procedure from the Initialize Tab Page of the
System Menu to remove the Memory Card.
1. Press the Remove Button next to Memory Card.
Character display Example (character
Shift-JIS code
Latin 1code
Section 8-2
code B5)
µ
137