Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 44

Overview
NSJ Controllers Connected via the Built-in Ethernet Port on the Display Section
Programming
Device (directly connected to computer)
connection
Operating the
Controller Section
(setting I/O tables,
transferring
programs,
monitoring, etc.)
USB Supported
Toolbus (serial Supported
port A or B)
Built-in Ether- Supported
net port
Hub
Connection to built-in Ethernet port on Display Section
NSJ
Computer
Controller
USB or
Toolbus
connection
Hub
Connection to built-in Ethernet port on Display Section
Ethernet
connection
NSJ
Computer
Controller
The Ethernet network address and node address must be set in the communi-
cations setting on the Comm Tab Page of the System Menu to enable using
the built-in Ethernet port of the NSJ Controller. The NSJ Controllers must all
be set to the same network address.
Local NSJ Controller
Setting up Transferring
DeviceNet screens to the
Display Section
Supported Supported
Supported Supported
Supported Supported
NSJ
Controller
DeviceNet
DeviceNet
NSJ
Controller
DeviceNet
DeviceNet
Remote NSJ Controller
(connected via network)
Operating the
Controller Section
(setting I/O tables,
transferring
programs,
monitoring, etc.)
Supported
Supported
Supported
Section 1-1
NSJ
Controller
DeviceNet
NSJ
Controller
DeviceNet
Setting up Transferring
DeviceNet screens to the
Display Section
Supported Supported
Supported Supported
Supported Supported
13