Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 86

Specifications
Item
Program check
Control output signals
Battery life
Self-diagnostics
Other functions
Specifications
Program checks are performed at the beginning of operation
for items such as no END instruction and instruction errors.
CX-Programmer can also be used to check programs.
RUN output: The internal contacts will turn ON (close) while
the Controller Section is operating (CJ1W-PA205R).
Refer to 11-3 Maintenance and Replacement Methods.
Battery Set: CJ1W-BAT01
Controller Section errors (watchdog timer), I/O bus errors,
memory errors, and battery errors.
Storage of number of times power has been interrupted.
(Stored in A514.)
Section 3-1
Reference
CS/CJ Series Program-
ming Manual (W394):
2-3 Checking Programs
CS/CJ Series Program-
ming Manual (W394):
6-4-3 RUN Output
This manual: 11-3-2
Battery Replacement
CJ Series Operation
Manual (W393): 11-2-5
Error Messages
This manual: 6-1 PLC
Setup and 10-2 NSJ
Troubleshooter Func-
tion
CJ Series Operation
Manual (W393): 10-3
Power OFF Operation
55