Omron NSJ CONTROLLERS - 03-2008 Operation Manual page 89

Specifications
Item
Data log graphs
Data Block Table
Consecutive line
drawing
Graphic display (fixed)
Frames
Tables
Libraries
User screens
Sheets
Number of label switches
Background screen files
Background colors
Project registration method Transfer from CX-Designer to Display Section using one of the following menu commands.
Note
58
• Number of log points
1 to 50,000
• Number of data logs per project
Up to 100 groups
• Number of logging points per project
Up to 160,000 (NS5: 120,000 points)
• Number of addresses that can be recorded to 1 group
Up to 16
• Number of addresses for standard logging
Up to 50
• Number of always logging points
50,000 max.
• Maximum number of records
Up to 1,000 lines
• Maximum number of fields
Up to 500 columns
• Data Quantity for 1 Data Block
102,400 bytes
Maximum number of coordinates
Up to 128
• Displayed at any position.
Rectangle, circle, ellipse, line, polyline, polygon, sector, arc.
• Up to 10 can be created per screen.
• Up to 256 functional objects can be created per frame page.
However, a limit of 1,024 objects per screen applies, and this may restrict the number of
objects per frame page.
• Number of tables
Any number of tables can be created, as long as the total number of objects per screen
does not exceed 1,024.
• Horizontal
Up to 30 columns
• Vertical
Up to 40 lines
• Number of functional objects per table
Up to 256
• Up to 4,096 libraries can be registered.
• Up to 4,000 screens, including base and pop-up screens, can be created per project.
• Up to 3 pop-up screens can be overlapped.
• Up to 32 sheets can be created per project.
• Up to 10 sheets can be set for layered display on standard screens.
• Up to 1,024 functional and fixed objects, including those inside frames and tables, can be
created per sheet.
• Up to 16.
• Displayable file formats
BMP, JPEG (RLE-format bmp files and progressive jpeg are not supported.)
256.
• PT - Transfer - Transfer [Computer->PT]
• PT - Transfer - Quick Transfer [Computer->PT]
• PT - Transfer - Transfer Tool
Refer to Appendix 1 Specifications in the NS-Series PT Programming Manual
(V073) for other display element specifications and special features.
Specification
Section 3-1