RRP 36 Belt Cleaner Assembly
Figure 7-38 Belt Cleaner Assembly
Removal
1.
Open the right cover door.
2.
Open the front cover and lower the main lever.
3.
Lift the Accumulator Belt locking lever and pull the assembly out a few inches.
4.
Using a 2.5 mm hex driver remove the two screws on the left side of the belt
cleaner assembly.
5.
Remove the belt cleaner assembly.
Replacement
Caution
Never run the printer without the belt cleaner installed or severe
damage to the Accumulator Belt will occur.
Caution
Ensure that the Accumulator Belt is fully inserted or severe
printer damage will result.
LEVER!
7-182
Phaser 7700 Color Laser Printer
NEVER FORCE THE MAIN
S7700-022