Programming Commander DELTA
Operating Instructions D869 e-con - 00.0 - 06/2023
Fig. 52: Setting up the user interface (5)
3.
Press and hold the desired symbol and drag it to move it
into or out of the status bar.
4.
Press
to return to Settings or
mode.
Default status bar settings
Fig. 53: Default status bar
Material thickness
detection
Seam Length
Stitch count
5.6.2
Setting the parameters
In Manual mode, you can set a variety of parameters. The functions
and how they affect the parameters are described further below.
to return to Manual
Sewing speed
Empty
Distance
Edge Guide
(if available)
79