Setting The Parameters - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Default status bar settings
Fig. 62: Default status bar
Material thickness
detection
Seam Length
Stitch count
6.5.2

Setting the parameters

In Manual mode, you can set a variety of parameters. The functions
and how they affect the parameters are described further below.
To access the parameter settings:
1. Press the symbol
 This opens the parameter settings interface.
Fig. 63: Setting the parameters
①
②
③
(1) - Search
(2) - Parameters cross-segment
(3) - Parameters Segment End
Sewing speed
Empty
to bring up the parameter pane.
⑤
④
(4) - Parameters Segment
(5) - Parameters Segment Begin
(6) - Context-sensitive help
Distance
Edge Guide
(if available)
⑥
91