Dürkopp Adler D869 e-con Service Instructions Manual page 102

Fig. 86: Assembling the sewing motor (2)
(3) - Toothed belt wheel
(4) - Motor
3. Tighten the toothed belt wheel (3) using the threaded pin (6).
4. Lay the cables (5) from the motor (4) through the tabletop and insert
Fig. 87: Assembling the sewing motor (3)
(7) - Screw
5. Attach the support plate (1) along with the motor (4) using the two
Fig. 88: Assembling the sewing motor (4)
(8) - Toothed belt
100
④
the plugs into the marked slots on the control.
⑦
screws (7) on the left.
⑧
⑥
③
⑤
(5) - Cable
(6) - Threaded pin
①
(1) - Support plate
Service Instructions D869 e-con - 00.0 - 09/2023
Sewing motor