Setting The Rfid Scanner Parameters; Setting The Desk Height Adjustment Parameters - Dürkopp Adler D869 e-con Service Instructions Manual

Important
The barcode must be composed of 3 to 32 bars. The 3-digit number of
the program (001 to 999) must be contained in the barcode.
Refer to the Appendix ( p. 229) for a few barcode examples that you
can use.
Information
The scanner also supports other types of barcodes. For a list of all
supported barcodes and information on how to configure them, refer to
the  Operating Instructions of the scanner manufacturer.

17.4.29 Setting the RFID Scanner parameters

Icon
RFID

17.4.30 Setting the Desk height adjustment parameters

Icon
144
Menu items
RFID scanner
RFID
Menu items
Desk height adjustment enable
Desk height offset
If there is an obstacle below the sensor,
the distance between the obstacle and
the floor must be specified.
Only visible for Desk height
adjustment enable
Desk height
Only visible for Desk height
adjustment enable
Value range
• Value range
On/Off
Value range
• Value range
On/Off
• Value range
-60.0 - 80.00 [cm]
• Value range
000.0 - 140.0
Service Instructions D869 e-con - 00.0 - 09/2023
Programming