Setting The Needle Cooling Parameters - Dürkopp Adler D869 e-con Service Instructions Manual

17.4.15 Setting the Needle Cooling parameters

Various settings can be made for the needle cooling. The possibilities are explained in more
detail in the table.
Icon
134
Menu items
Mode
t Delay
Lag time, after which the needle cooling
is deactivated.
Cool Speed
Speed at which the needle cooling
is activated.
Service Instructions D869 e-con - 00.0 - 09/2023
Programming
Value range
• Value range
Off/
On/
Related to sewing
speed,
Edge trimmer
Only visible for Mode
On, Related to
sewing speed or Edge
trimmer
• Value range
00.0 - 10.0 [s]
Only visible for Mode
Related to sewing
speed
• Value range
0000 - 6000 [rpm]