Dürkopp Adler D869 e-con Service Instructions Manual page 126

Icon
124
Menu items
Pre-tension
Setting of the pretension during thread
cutting.
Additional setting options are not visible
unless Pre-tension has been activated.
nd
2 thread tension
Thread tension open at service
stop
Service Instructions D869 e-con - 00.0 - 09/2023
Programming
Value range
• Value range
On/Off
Pre-tension
A value of 0 is recom-
mended as the preten-
sion is generated by a
mechanical tension.
• Value range
00 - 99 [%]
Delay time
The needle thread
tension remains closed
for a defined period of
time after thread cutting
and prevents the needle
thread from being pulled
further when the sewing
material is removed.
Without a thread
trimmer, this menu item
should be set to a very
low value.
• Value range
0.1 - 7.5 [s]
Tension close by
needle movement
With this function, the
needle thread tension is
activated when sewing
start is done with jog dial
or via single stitch button.
• Value range
On/Off
State After thread
trimming
• Value range
Unchanged/Off/On
State After power
on
• Value range
Unchanged/Off/On
• Value range
Off/On