Dürkopp Adler D869 e-con Service Instructions Manual page 28

Important
Fig. 15: Disassembling the thread tension plate (2)
On 2-needle machines the plug of connection X103 must be detached
from the PCB found behind the thread tension plate.
Assembling the thread tension plate
To assemble the thread tension plate:
1. On 2-needle machines: Connect the plug at connection X103.
2. Assemble the thread tension plate (3).
3. Tighten screws (1) and (2).
4. Slip plugs onto the PCB:
26
• Thread clamp: Connection X10 (optional)
• Thread tension: Connection X11
• Push button: Connection X12
Working basis
Service Instructions D869 e-con - 00.0 - 09/2023