Table of Contents
Advertisement
Icon
136
Menu items
Feeding method
Start
Only visible for Feeding method
intermittent
Setting of the start and stop angle under
Start/Stop has been adapted to the
machine. The values should not be
changed.
Stop
Only visible for Feeding method
intermittent
Setting of the start and stop angle under
Start/Stop has been adapted to
the machine. The values should not be
changed
Switch off on sewing motor stop
Puller is not active when the sewing motor
is stopped. Holding force of the roller is off;
sewing material can be pulled out from
between the rollers.
Active when raised
Rollers are always active even when
the puller is raised.
Top
Service Instructions D869 e-con - 00.0 - 09/2023
Programming
Value range
constant = even
transport
intermittent = trans-
port adapted to the
rhythm of the feed dog
• Value range
0 - 359 [°]
( ° equals handwheel
position)
• Value range
0 - 359 [°]
( ° equals handwheel
position)
• Value range
On/Off
• Value range
On/Off
Transmission
• Value range
00.0 - 65.0
Current feed
(active)
• Value range
0.0 - 5.0 [A]
Current feed
(passive)
• Value range
0.0 - 5.0 [A]
Diameter
• Value range
0000 – 9999 [mm]
Direction
0 (X) = right
1 (
) = left
Closed Loop
0 (X) = non-regulated
1 (
) = regulated
Advertisement
Table of Contents
