10 Sewing feet
10.1
Proper setting
All shafts of the gear are seated on the flat.
The gear has no lateral play.
Spring pressure always keeps the gear securely in the zero position on
the control cam.
Order
First, check the following setting:
62
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Move the machine into the service routine before
adjusting the sewing feet.
Adjusting the sewing foot lifting gear
NOTICE
Property damage may occur!
Possible damage to the PCB, impairing the full operational readiness
of the machine.
Always wear an antistatic armband whenever you work on the PCB!
• Basic setting of the eccentrics for sewing foot stroke ( p. 38)
Service Instructions D869 e-con - 00.0 - 09/2023
Sewing feet