Setting The Rfw/Ssd Parameters - Dürkopp Adler D869 e-con Service Instructions Manual

Programming
Icon

17.4.9 Setting the RFW/SSD parameters

Various settings can be made for the remaining thread monitor and the
bobbin rotation monitor. The possibilities are explained in more detail in
the table.
Icon
Service Instructions D869 e-con - 00.0 - 09/2023
Menu items
Transport
Menu items
CAN - Bobbin monitor
With this function, the CAN PCB is
activated.
It is also necessary to select the desired
remaining thread monitor in Manual
Mode in the Parameters section
( Operating Instructions)
Bobbin monitor mode
Sewing monitoring On/Off
RFW Threshold
RFW Intensity
Sewing stop
Value range
Change stitch
length at position
• Value range
On/Off
Start
• Value range
000 - 350 [°]
Stop
• Value range
000 - 350 [°]
Value range
• Value range
On/Off
• Value range
Off
Software / Stitch
Counter
Monitor
Only visible for CAN -
Bobbin monitor On
• Value range
On/Off
Values only apply to
the remaining thread
monitor, not the SSD.
• Value range
0.0 - 4.0
Values only apply to
the remaining thread
monitor, not the SSD.
• Value range
0.0 - 4.0
• Value range
On/Off
129