Programming
Mode
2
height)
DB3000
DB2000
Function module 1 - 8
Sewing light
Machine head light
Sewing foot lift
2
Fullness deactivation
Needle thread monitor (right/left)
Needle thread identification
(right/left)
Bobbin thread identification
Housing for cones
Status of the camera
Bobbin winder lever
Bobbin cover scanner (right/left)
Segment abort
Bobbin thread monitor
Edge Guide Check Up/Down
Left needle bar
Right needle bar
Automatic stitch length adjustment
Poka yoke 1-4 result
Short stitch
Each input can be switched to stored or not stored.
Service Instructions D869 e-con - 00.0 - 09/2023
nd
edge guide position (gap and
nd
position sewing foot lift
Explanation/reference
p. 138
p. 121
p. 121
p. 143/Operating Instructions
Operating Instructions/ p. 151
Operating Instructions/ p. 151
Operating Instructions/ p. 123
p. 130
Enabling of sewing by the camera if image quality is
sufficient
Input simulates the flipping of the bobbin lever
Bobbin winding process starts
Input for the bobbin cover
Triggers the scan for identifying the bobbin
p. 129
Operating Instructions
147