Cleaning The Filter Element - Dürkopp Adler D869 e-con Service Instructions Manual

Maintenance
Fig. 130: Draining the water-oil mixture
(1) - Filter element
(2) - Collection tray
To drain the water-oil mixture:
1. Disconnect the machine from the compressed air supply.
2. Place the vessel under the drain screw (3).
3. Loosen the drain screw (3) completely.
4. Allow the water-oil mixture to drain into the vessel.
5. Tighten the drain screw (3).
6. Connect the machine to the compressed air supply.

18.3.3 Cleaning the filter element

Service Instructions D869 e-con - 00.0 - 09/2023
①
②
NOTICE
Damage to the paintwork from solvent-based cleaners!
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter tray.
③
(3) - Drain screw
197